to-247 1 2 product benefits low losses low noise switching cooler operation higher reliability systems increased system powerdensity product features ultrafast recovery times soft recovery characteristics popular to-247 package orsurface mount d 3 pak package low forward voltage high blocking voltage low leakage current product applications anti-parallel diode -switchmode power supply-inverters free wheeling diode -motor controllers-converters snubber diode uninterruptible power supply (ups) induction heating high speed rectifiers apt15ds60bg 600v 13a APT15DS60SG 600v 13a * g denotes rohs compliant, pb free terminal finish. 053-3006 rev c 2-2007 apt website - http://www.advancedpower.com static electrical characteristics symbol v f i rm c t unit volts a pf min typ max 3.2 4.0 4.2 2.4 150500 24 forward voltagemaximum reverse leakage current junction capacitance, v r = 200v i f = 15a i f = 30a i f = 15a, t j = 125c v r = 600v v r = 600v, t j = 125c characteristic / test conditionsmaximum d.c. reverse voltage maximum peak repetitive reverse voltage maximum working peak reverse voltage maximum average forward current (t c = 77c, duty cycle = 0.5) rms forward current (square wave, 50% duty)non-repetitive forward surge current (t j = 45c, 8.3ms) operating and storagetemperature rangelead temperature for 10 sec. symbol v r v rrm v rwm i f (av) i f (rms) i fsm t j ,t stg t l unit volts amps c apt15ds60b_sg 600 1317 110 -55 to 150 300 maximum ratings all ratings: t c = 25c unless otherwise specified. 2-300v high frequency soft recovery rectifier diodes in series 12 1 - cathode 2 2 - anode 1 d 3 pak 1 2 downloaded from: http:///
apt15ds60b_sg dynamic characteristics 053-3006 rev c 2-2007 thermal and mechanical characteristics apt reserves the right to change, without notice, the specifications and information contained herein. characteristic / test conditionsjunction-to-case thermal resistance junction-to-ambient thermal resistance package weight maximum mounting torque symbol r jc r ja w t torque min typ max 1.5 40 0.22 5.9 10 1.1 unit c/w oz g lbinnm min typ max - 13 -1 4 -1 2 - 1.5 - -3 1 -8 5 - 4.7 - -2 0 - 160 -1 8 unit ns nc amps ns nc amps ns nc amps characteristicreverse recovery time reverse recovery time reverse recovery charge maximum reverse recovery current reverse recovery time reverse recovery charge maximum reverse recovery current reverse recovery time reverse recovery charge maximum reverse recovery current symbol t rr t rr q rr i rrm t rr q rr i rrm t rr q rr i rrm test conditions i f = 15a, di f /dt = -200a/ s v r = 400v, t c = 25 c i f = 15a, di f /dt = -200a/ s v r = 400v, t c = 125 c i f = 15a, di f /dt = -1000a/ s v r = 400v, t c = 125 c i f = 1a, di f /dt = -100a/ s, v r = 30v, t j = 25 c z jc , thermal impedance (c/w) 10 -5 10 -4 10 -3 10 -2 10 -1 1.0 10 rectangular pulse duration (seconds) figure 1a. maximum effective transient thermal impedance, junction-to-case vs. pulse duration 1.601.40 1.20 1.00 0.80 0.60 0.40 0.20 0 note: duty factor d = t 1 / t 2 peak t j = p dm x z jc + t c t 1 t 2 p dm 0.5 single pulse 0.1 0.3 0.7 0.9 0.05 figure 1b, transient thermal impedance model 0.355 0.854 0.291 0.00229 0.0311 0.444 dissipated power (watts) t j (c) t c (c) z ext are the external thermal impedances: case to sink,sink to ambient, etc. set to zero when modeling only the case to junction. z ext downloaded from: http:///
053-3006 rev c 2-2007 apt15ds60b_sg typical performance curves t j = 125 c v r = 400v 7.5a 15a 30a q rr t rr q rr , reverse recovery charge i f , forward current (nc) (a) i rrm , reverse recovery current t rr , reverse recovery time (a) (ns) t j = -55 c t j = 25 c t j = 125 c t j = 150 c v f , anode-to-cathode voltage (v) -di f /dt, current rate of change(a/ s) figure 2. forward current vs. forward voltage figure 3. reverse recovery time vs. current rate of change -di f /dt, current rate of change (a/ s) -di f /dt, current rate of change (a/ s) figure 4. reverse recovery charge vs. current rate of change figure 5. reverse recovery current vs. current rate of change duty cycle = 0.5 t j = 150 c 2016 12 84 0 c j , junction capacitance k f , dynamic parameters (pf) (normalized to 800a/ s) i f(av) (a) t j , junction temperature ( c) case temperature ( c) figure 6. dynamic parameters vs. junction temperature figure 7. maximum average forward current vs. casetemperature v r , reverse voltage (v) figure 8. junction capacitance vs. reverse voltage 15a 30a 7.5a 0 1 2 3 4 5 6 0 200 400 600 800 1000 1200 0 200 400 600 800 1000 1200 0 200 400 600 800 1000 1200 6050 40 30 20 10 0 200150 100 50 0 15a 7.5a 30a 4035 30 25 20 15 10 50 2016 12 84 0 t j = 125 c v r = 400v t rr q rr i rrm 1.4 1.21.0 0.8 0.6 0.4 0.2 0.0 120100 8060 40 20 0 0 25 50 75 100 125 150 25 50 75 100 125 150 .4 1 10 100 200 t j = 125 c v r = 400v downloaded from: http:///
apt15ds60b_sg 053-3006 rev c 2-2007 4 3 1 2 5 5 zero 1 2 3 4 di f /dt - rate of diode current change through zero crossing. i f - forward conduction current i rrm - maximum reverse recovery current. t rr - reverse r ecovery time, measured from zero crossing where diode q rr - area under the curve defined by i rrm and t rr . current goes from positive to negative, to the point at which the straight line through i rrm and 0.25 i rrm passes through zero. figure 9. diode test circuit figure 10, diode reverse recovery waveform and definitions 0.25 i rrm pearson 2878 current transformer di f /dt adjust 30 h d.u.t. +18v 0v v r t rr / q rr waveform apt6017bll to - 247 package outline d 3 pak package outline 15.85 (.624)16.05(.632) 18.70 (.736)19.10 (.752) 1.15 (.045)1.45 (.057) 5.45 (.215) bsc(2 plcs.) 4.90 (.193)5.10 (.201) 1.45 (.057) 1.60 (.063) 2.70 (.106)2.90 (.114) 0.40 (.016)0.65 (.026) dimensions in millimeters (inches) heat sink (isolated) and leads are plated 2.40 (.094)2.70 (.106) (base of lead) 1.90 (.075)2.10 (.083) cathode anode 0.020 (.001)0.250 (.010) 1.20 (.047)1.40 (.055) 12.40 (.488)12.70 (.500) 13.30 (.524)13.60(.535) 1.00 (.039)1.15(.045) 15.49 (.610)16.26 (.640) 5.38 (.212)6.20 (.244) 6.15 (.242) bsc 4.50 (.177) max. 19.81 (.780)20.32 (.800) 20.80 (.819)21.46 (.845) 1.65 (.065)2.13 (.084) 1.01 (.040)1.40 (.055) 10.90 (.430) bsc 3.50 (.138)3.81 (.150) 4.69 (.185)5.31 (.209) 1.49 (.059) 2.49 (.098) 2.21 (.087)2.59 (.102) 0.40 (.016)0.79 (.031) dimensions in millimeters and (inches) anode cathode (isolated) e1 sac: tin, silver, copper e1 sac: tin, silver, copper 3 100% sn downloaded from: http:///
|
